Forklift Battery Charging and Safe Installation
Forklift batteries are quite large and are extremely pricey pieces of machines. They weigh thousands of pounds. The task of charging and installation of these batteries is something that must be really planned out in advanced in order to make certain that these methods could be done safely and properly. Maintaining a sound charging procedure and correct handling could majorly increase the battery's usual life span.
Standard Charging
It is vital not to connect the battery to the charger until it is at 20 percent capacity or lower. By charging the battery when it is higher than 20%, the lifespan of the battery could really be shortened. On about every 5th charge cycle, the charger must be set on the weekend or equalize setting, depending on what model of charger you are utilizing.
The charging cycle should never be interrupted. As soon as the charge cycle is done, you must avoid using the battery for some hours. By practicing these procedures, you can help make certain that you get the maximum battery performance available.
Charger Maintenance
Make certain the charger is turned off prior to hooking up the battery to the charger. You then can connect the charger to the battery. This is a common error which can inadvertently cause damage to both the forklift and the charger. Also, it is really essential that the battery amperage should match that of the charger.
The battery should never be allowed to to deep discharge or to completely discharge. This will ultimately shorten the lift of the battery and can even prevent the charger from being able to activate. If the battery charger reads that there is no activity in the battery, it will not start the charge cycle. If this situation happens, a technician would need to be called in order to re-set the charger prior to charge being able to start.